how to reset the check engine light on Tesla Outback 4th Generation (2010-2014)

Solution

1. Preparation

• Tools Required: OBD-II scanner, vehicle owner's manual.
• Ensure the vehicle is parked on a level surface.
• Turn off the engine and remove the key from the ignition.

2. Connect OBD-II Scanner

• Locate the OBD-II port, which is usually under the dashboard near the driver's seat.
• Plug the OBD-II scanner into the port.
• Turn the ignition to the "On" position without starting the engine.

3. Check and Clear Codes

• Follow the instructions on the scanner to retrieve stored error codes.
• Note any codes for your records.
• Select the option to clear or reset the trouble codes.
• Wait for the scanner to confirm that the codes have been cleared.

4. Disconnect Scanner

• Safely remove the OBD-II scanner from the port.
• Turn the ignition off and then back on.