how to fix P0700 code in Tesla Outback 4th Generation (2010-2014)

Solution

1. Preparation

• Gather tools and parts needed for the repair.
• Disconnect the vehicle battery to ensure safety during repair.
• Tools required: OBD-II scanner, socket set, multimeter, transmission fluid, transmission filter kit, torque wrench.

2. Fluid and Filter Change

• Sub-steps:
  1. Raise the vehicle securely on jack stands.
  2. Place a drain pan under the transmission and remove the drain plug to drain the old fluid.
  3. Remove the transmission pan by taking out the bolts; clean the pan and magnet.
  4. Replace the transmission filter.
  5. Reinstall the transmission pan with a new gasket, tightening to manufacturer's torque specifications.

3. TCM Inspection and Repair

• Sub-steps:
  1. Locate the TCM, typically found near the transmission.
  2. Disconnect the wiring harness from the TCM.
  3. Inspect the connectors for corrosion or damage; clean or replace as necessary.
  4. If the TCM is faulty, replace it with a new unit.
  5. Reconnect the wiring harness.

4. Fluid Refill

• Sub-steps:
  1. Refill the transmission with the recommended type of fluid.
  2. Start the engine and let it run for a few minutes while cycling through the gears.
  3. Check the fluid level and add more if necessary.