why does my Skoda Octavia's windshield wipers stop working

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and ensure it is turned off.
• Disconnect the negative battery terminal to prevent electrical hazards.

2. Inspect and Replace Fuse

• Locate the fuse box, usually found under the dashboard or in the engine compartment.
• Remove the cover and find the windshield wiper fuse using the fuse diagram.
• Inspect the fuse for continuity and replace with an identical fuse if blown (typically 10A or according to the manual).

3. Test Wiper Motor

• Reconnect the battery terminal and turn on the ignition.
• Use a multimeter to check for voltage at the wiper motor connector when the wiper switch is activated.
  • Expected voltage: 12V. If no voltage is present, check wiring for continuity or damage.

4. Replace Wiper Motor (if necessary)

• If the motor is faulty, remove it by:
  • Detaching the wiper arms (use a wiper arm puller if stuck).
  • Unscrewing the mounting bolts from the wiper motor.
  • Disconnecting the electrical connector from the motor.
• Install the new wiper motor:
  • Connect the electrical connector.
  • Secure the motor in place with bolts and reattach the wiper arms.

5. Check Wiper Linkage

• Inspect the wiper linkage for any broken or disconnected parts.
• If damaged, replace the linkage assembly.

6. Final Assembly and Testing

• Reinstall any removed components.
• Test the wipers by activating them multiple times at different speeds.
• Ensure the washer fluid spray function works correctly.