why does my Skoda Octavia shudder when I apply the brakes

Solution

1. Preparation

• Gather tools and parts needed for the repair.
• Ensure the vehicle is parked on a level surface and secure it with wheel chocks.
• Disconnect the battery if working on electrical components.

2. Remove Wheel

1. Loosen the lug nuts on the wheel where the shuddering is felt.
2. Raise the vehicle using a jack and secure it with jack stands.
3. Fully remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Brake Pads

1. Remove the caliper by unscrewing the caliper bolts using a socket set.
2. Carefully slide out the caliper and support it using a bungee cord or similar tool.
3. Remove the old brake pads from the caliper bracket.
4. Install new brake pads, ensuring they are correctly seated in the bracket.

Brake Rotors

1. If the rotors are warped, remove the rotor by unscrewing the retaining screws (if applicable).
2. Inspect the rotor surface for grooves or damage; if necessary, replace with a new rotor.
3. Clean the hub surface with a wire brush to ensure proper rotor seating.
4. Install the new rotor and secure it with retaining screws.

4. Reassemble

1. Reattach the caliper over the new brake pads and torque the caliper bolts to the manufacturer's specifications.
2. Reinstall the wheel and hand-tighten the lug nuts.
3. Lower the vehicle and torque the lug nuts to the specified value.

5. Final Checks

• Reconnect the battery if it was disconnected.
• Pump the brake pedal several times to seat the pads against the rotor before driving.