what maintenance should I do at 60,000 miles on my Skoda Octavia

Solution

1. Engine Oil Change

• Sub-steps:
  1. Gather required tools: socket set, oil filter wrench, oil catch pan.
  2. Run the engine for a few minutes to warm the oil, then turn it off.
  3. Remove the oil drain plug and allow old oil to completely drain into the pan.
  4. Replace the oil filter using the oil filter wrench.
  5. Reinstall the drain plug, ensuring it is torqued to manufacturer specifications.
  6. Add new engine oil (check owner's manual for the correct type and quantity).

2. Brake Inspection and Replacement

• Sub-steps:
  1. Lift the vehicle and secure with jack stands.
  2. Remove the wheel to access the brake caliper.
  3. Inspect brake pads for thickness; replace if below manufacturer specifications.
  4. Inspect rotors for wear; replace if scoring or excessive thickness variation is present.
  5. Reassemble the brake components and wheel, then lower the vehicle.

3. Tire Rotation and Alignment

• Sub-steps:
  1. Lift the vehicle and remove all four wheels.
  2. Rotate tires to recommended positions (e.g., front to rear).
  3. Inspect tire pressure and adjust to the recommended levels.
  4. Perform a wheel alignment check and adjust if necessary.

4. Coolant System Check

• Sub-steps:
  1. Inspect coolant level; add coolant if low.
  2. Check hoses for cracks or leaks and replace as needed.
  3. Inspect the radiator for debris and clean if necessary.
  4. Test the coolant for proper pH and freezing point.

5. Battery Maintenance

• Sub-steps:
  1. Inspect battery terminals for corrosion; clean with a wire brush if needed.
  2. Use a multimeter to check battery voltage; replace if below 12.4 volts.
  3. Ensure battery is securely mounted and connections are tight.