Skoda Octavia NFL (2020-Present) brake pedal is too soft how to fix

Solution

1. Preparation

• Gather all necessary tools and parts.
• Ensure the vehicle is securely lifted and supported on jack stands.
• Disconnect the battery to prevent any electrical issues while working on the braking system.

2. Check and Refill Brake Fluid

• Remove the cap from the brake fluid reservoir.
• Inspect the brake fluid condition; if dirty, it should be replaced.
• Top off the brake fluid with the manufacturer-recommended type (DOT 4 for Skoda).
• Replace the reservoir cap securely.

3. Inspect and Repair Brake Lines

• Visually inspect all brake lines for cracks or corrosion.
• If leaks are found, replace the damaged brake lines using a line wrench.
• Bleed the brake system after replacing lines to remove any air bubbles.

4. Replace the Brake Master Cylinder (if necessary)

• Remove the brake lines from the master cylinder using a line wrench.
• Unbolt the master cylinder from the brake booster (usually 2-4 bolts).
• Install the new master cylinder by reversing the removal steps.
• Torque the bolts to the manufacturer’s specifications (consult service manual).

5. Bleed the Brake System

• Use a brake bleeder kit or a helper to bleed the brakes.
• Start from the furthest wheel from the master cylinder and work towards the closest.
• Ensure there are no air bubbles in the fluid by continuously checking fluid levels in the reservoir.