my Skoda Octavia's windshield wipers are not working properly, what should I do

Solution

1. Preparation

• Gather tools and parts needed for the repair.
• Disconnect the battery to ensure safety.

2. Check and Replace Wiper Fuse

• Locate the fuse box; refer to the owner’s manual for the exact location.
• Remove the cover and identify the wiper fuse.
• Use a multimeter to check for continuity in the fuse.
  • If the fuse is blown, replace it with a new one of the same amperage.

3. Inspect and Repair Wiper Motor

• Remove any engine cover if necessary to access the wiper motor.
• Disconnect the motor connector and inspect for corrosion or loose connections.
• If connections are intact, apply direct power to the motor using jumper wires.
  • If the motor operates, it may need replacement due to a faulty switch.
  • If it does not operate, proceed to replace the wiper motor.

4. Replace Wiper Motor (if necessary)

• Unscrew and remove the wiper motor from its mounting.
• Disconnect the wiper linkage from the motor if applicable.
• Install the new wiper motor by reversing the removal steps.
• Reconnect the motor and ensure the linkage is properly attached.

5. Reassemble and Test

• Reconnect the battery.
• Test the wipers by operating them in all speeds.
• Ensure that the washer fluid system is functioning by checking the spray.