my Skoda Octavia NFL (2020-Present) wipers won’t turn off, how to fix it

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the ignition is turned off.
• Disconnect the battery to avoid electrical shock.

2. Remove Control Stalk

• Tools Required: Torx screwdriver, trim removal tool.
• Locate the screws securing the steering column cover and remove them.
• Carefully pry off the steering column cover using the trim removal tool.
• Disconnect the wiring harness from the wiper control stalk.
• Remove the control stalk from the steering column.

3. Inspect and Replace Wiper Relay

• Tools Required: Socket set.
• Locate the wiper relay in the fuse box (refer to the owner's manual for exact location).
• Remove the relay and test it using a multimeter or replace it with a new one.
• Reinstall the relay back into the fuse box.

4. Inspect Wiper Motor

• Tools Required: Socket set, multimeter.
• Locate the wiper motor (usually under the cowl).
• Disconnect the electrical connector from the wiper motor.
• Use a multimeter to check for proper voltage at the motor connector while operating the wipers.
• If voltage is present but the motor does not operate, replace the wiper motor.

5. Reassemble Components

• Reinstall the wiper control stalk by connecting the wiring harness and securing it in place.
• Replace the steering column cover and screws.
• Reconnect the battery.