my Skoda Octavia NFL (2020-Present) has a strong pull to the left when braking what's wrong

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a flat surface and engage the parking brake.
• Wear safety gloves and goggles throughout the process.

2. Inspect and Replace Brake Components

• Tools Required: Jack and jack stands, socket set, torque wrench, brake cleaner, and a C-clamp.

1. Loosen the lug nuts on the front left wheel.
2. Use the jack to lift the vehicle and secure it with jack stands.
3. Remove the front left wheel.
4. Inspect the brake pads for uneven wear. Replace if necessary.
   • If pads are worn unevenly, replace both left and right pads for balance.
5. Check the brake rotor for warping or scoring. Replace if damaged.
6. Clean the caliper and rotor surfaces with brake cleaner.

3. Check and Adjust Suspension and Alignment

• Tools Required: Alignment tool (if available), basic hand tools.

1. Inspect the suspension components such as control arms, tie rods, and struts for any signs of wear or damage.
2. If any components are worn, replace them accordingly.
3. Check the vehicle's alignment using an alignment tool or take it to a professional alignment shop.
4. Adjust as necessary to ensure proper alignment.

4. Final Reassembly

• Reinstall the wheel and torque the lug nuts to manufacturer specifications (usually around 80-100 ft-lbs).
• Lower the vehicle and remove the jack stands.
• Perform a final check of fluid levels and inspect for any leaks.