my Skoda Octavia NFL (2020-Present) has a popping noise in the suspension, what to do

Solution

1. Preparation

• Gather all necessary tools and parts.
• Park the vehicle on a flat surface and engage the parking brake.
• Wear safety gloves and goggles.

2. Raise the Vehicle

• Use a jack to lift the vehicle at the designated lifting points.
• Secure the vehicle with jack stands for safety.

3. Inspect and Replace Damaged Components

• Control Arms and Bushings:

  • Remove the bolts securing the control arm to the chassis and the knuckle.
  • Inspect the bushings for cracks or excessive wear; replace if necessary.
  • Torque bolts to factory specifications during reassembly (check service manual for exact values).

• Sway Bar Links:

  • Remove the nuts securing the sway bar links to the sway bar and the control arm.
  • Inspect for wear; replace if rubber bushings are cracked or if there is excessive play.
  • Torque to manufacturer's specifications.

• Struts/Shock Absorbers:

  • Remove the strut assembly by unbolting it from the knuckle and upper mount.
  • Inspect for leaks or damage; replace if necessary.
  • Reinstall and torque all mounting bolts to the correct specifications.

4. Reassemble and Lower the Vehicle

• Ensure all components are securely fastened.
• Remove jack stands and lower the vehicle to the ground.

5. Final Inspection

• Conduct a final inspection of all components for proper installation.
• Check for any obstructions or loose parts that could cause noise.