how to check for leaks in my Skoda Octavia's transmission system

Solution

1. Preparation

• Gather tools and materials required for the repair.
• Ensure the vehicle is parked on a level surface and secure it with wheel chocks.
• Disconnect the battery for safety.

2. Check Fluid Level

• Remove the transmission dipstick.
• Wipe it clean, reinsert it, and remove it again to check the fluid level.
• If the fluid is low, top it up with the appropriate transmission fluid type as specified in the owner's manual.

3. Inspect Seals and Gaskets

• Use a socket set to remove any components obstructing access to the transmission seals (e.g., exhaust pipes, heat shields).
• Visually inspect the transmission mounts, seals, and gaskets for cracks or signs of wear.
• If any parts are damaged, proceed to replace them.

4. Address Transmission Pan

• If the transmission pan is found to be leaking, drain the transmission fluid into a suitable container.
• Remove the transmission pan bolts using a socket wrench.
• Carefully lower the pan and replace the gasket with a new one.
• Reinstall the pan and torque the bolts to the specified value (check service manual for torque specifications).
• Refill the transmission with the appropriate fluid.

5. Perform Leak Test

• After repairs, start the vehicle and allow it to reach operating temperature.
• Check for leaks around repaired areas while the engine is running.