why does my Renault Clio V (2019-Present) shake when I brake at high speeds?

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

521 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibrations in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow brakes to cool before inspecting or working on them.

Symptoms

•Noticeable shaking in the steering wheel when braking
•Vibration felt through the brake pedal
•Increased stopping distance
•Potential squeaking or grinding noises from the brakes
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven wear using a run-out gauge.
2
Check the brake pads for wear and ensure they are properly seated.
3
Examine the suspension components (tie rods, bushings, control arms) for wear or damage.
4
Inspect wheel balance and alignment using a wheel balancer and alignment rack.
5
Check for any brake fluid leaks around calipers or brake lines.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Dial indicator
•Torque wrench
•Brake pad spreader

Parts Required

•Brake rotors
•Brake pads
•Brake grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven wear using a run-out gauge.
2
Check the brake pads for wear and ensure they are properly seated.
3
Examine the suspension components (tie rods, bushings, control arms) for wear or damage.
4
Inspect wheel balance and alignment using a wheel balancer and alignment rack.
5
Check for any brake fluid leaks around calipers or brake lines.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves.

2. Raise the Vehicle

Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the front wheels using a socket set.

3. Inspect and Replace Brake Rotors

Inspect Rotors: Measure rotor thickness and check for warping using a dial indicator.
Remove Rotors: Unscrew the caliper bracket bolts and slide the caliper off. Remove the rotor by unscrewing the retaining screws and pulling it off the hub.
Install New Rotors: Place the new rotor onto the hub. Secure it with retaining screws and torque to manufacturer specifications (typically around 10-15 Nm).
Reinstall Caliper: Position the caliper back over the rotor, ensuring the brake pads fit into place. Torque caliper bolts to manufacturer specifications (typically around 25-30 Nm).

4. Inspect and Replace Brake Pads

Check Pad Condition: If pads are worn below specifications (typically below 3mm), replace them.
Remove Old Pads: Slide out the old pads from the caliper bracket.
Install New Pads: Apply brake grease to the back of the new pads and slide them into the caliper bracket.

5. Wheel Reinstallation

Reinstall the front wheels and torque lug nuts to manufacturer specifications (typically around 100-120 Nm).
Lower the vehicle from jack stands.

6. Test Drive

Conduct a test drive to ensure vibrations are eliminated and braking performance is restored.