why does my Renault Clio V (2019-Present) shake when I brake?

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

486 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the brake system to avoid accidental activation of electronic components.
•Allow the brake components to cool before handling to prevent burns.

Symptoms

•Steering wheel shakes or vibrates during braking
•Vehicle pulls to one side when braking
•Increased brake pedal pulsation
•Uneven wear on brake pads or rotors
•Noise such as grinding or squeaking when braking

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven wear.
2
Check the brake pads for wear and ensure they are properly seated.
3
Verify wheel alignment and suspension components for wear or damage.
4
Use a dial indicator to measure rotor runout.
5
Check tire balance and condition to rule out any related issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Dial indicator
•Torque wrench
•Brake cleaner

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven wear.
2
Check the brake pads for wear and ensure they are properly seated.
3
Verify wheel alignment and suspension components for wear or damage.
4
Use a dial indicator to measure rotor runout.
5
Check tire balance and condition to rule out any related issues.

Solution

1. Preparation

Gather tools: jack, jack stands, lug wrench, dial indicator, torque wrench, and brake cleaner.
Ensure the vehicle is parked on a level surface and the engine is off.
Wear safety gloves and goggles.

2. Lift the Vehicle

Loosen the lug nuts on the front wheels slightly while the vehicle is still on the ground.
Use a jack to lift the vehicle and secure it with jack stands.
Remove the front wheels completely.

3. Inspect and Replace Brake Components

Inspect the Brake Rotors

Check for signs of warping, scoring, or uneven wear.
If warped, proceed to replace the rotors.

Replace Brake Pads

Remove the caliper bolts and slide the caliper off the rotor.
Remove the old brake pads and clean the caliper bracket with brake cleaner.
Install new brake pads, ensuring they are seated correctly.

4. Measure Rotor Runout

Attach a dial indicator to the caliper bracket and measure the rotor’s runout.
If the runout exceeds manufacturer specifications, replace the rotor.

5. Reassemble and Torque

Reinstall the caliper and tighten the caliper bolts to manufacturer specifications using a torque wrench.
Reattach the wheels and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the specified value.