why does my Renault Clio V (2019-Present) shake when I brake

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

461 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking when braking in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow brakes to cool before working on them.

Symptoms

•Steering wheel vibrates when braking
•Vehicle shakes or shudders during braking
•Increased braking distance
•No unusual noises during braking
•Possible uneven tire wear

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and condition.
3
Examine suspension components for wear or damage.
4
Verify wheel alignment and balance.
5
Inspect tires for uneven wear or damage.
6
Scan for any brake system error codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Brake caliper tool
•Torque wrench

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety gloves and glasses.

2. Raise the Vehicle

Use a jack to lift the vehicle and secure it with jack stands.
Remove the front wheels using a socket set.

3. Inspect and Replace Brake Rotors

Inspection: Check rotors for warping or surface damage using a dial indicator.
Replacement:
1. Remove caliper bolts with a socket.
2. Slide the caliper off the rotor and suspend it using a bungee cord.
3. Remove the rotor by unscrewing any retaining screws.
4. Install new rotors, ensuring they are properly seated.
5. Torque the rotor screws to the manufacturer's specifications (typically around 10 Nm).

4. Inspect and Replace Brake Pads

Inspection: Check the thickness of the brake pads; replace if below 3mm.
Replacement:
1. Remove the old pads from the caliper bracket.
2. Compress the caliper piston using a brake caliper tool.
3. Install new brake pads in the caliper bracket.
4. Reattach the caliper over the new pads and torque bolts to specifications (typically around 25 Nm).

5. Reassemble and Lower the Vehicle

Reinstall the front wheels and torque lug nuts to specifications (typically around 100 Nm).
Lower the vehicle from the jack stands.