why does my Renault Clio V (2019-Present) shake when I brake

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

441 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking shake in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the brakes to cool before inspecting or replacing components.

Symptoms

•Steering wheel shakes during braking
•Vehicle pulls to one side while braking
•Brake pedal pulsates or feels uneven
•Increased braking distance
•Unusual noises (grinding or squeaking) when braking

Diagnostic Steps

1
Inspect brake pads for wear and condition.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper operation and sticking.
4
Test wheel alignment and balance.
5
Inspect suspension components (e.g., struts, control arms) for damage or wear.
6
Scan for any error codes related to the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Screwdriver set

Parts Required

•Brake pads
•Brake rotors (if needed)
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and condition.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper operation and sticking.
4
Test wheel alignment and balance.
5
Inspect suspension components (e.g., struts, control arms) for damage or wear.
6
Scan for any error codes related to the braking system.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Wear safety gear (gloves, goggles).

2. Inspect and Replace Brake Pads

Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Remove the wheel to access the brake assembly.
3. Inspect the brake pads for thickness; replace if less than 3 mm.
4. Remove the caliper bolts using a socket set, and gently slide the caliper off.
5. Replace the old brake pads with new ones, ensuring they are properly seated.
6. Reattach the caliper and torque bolts to manufacturer specifications (usually around 25-30 Nm).

3. Check and Resurface/Replace Brake Rotors

Sub-steps:
1. Inspect the brake rotors for warping or scoring using a straight edge.
2. If warped, either resurface or replace the rotors. For resurfacing, ensure the thickness is within limits (usually above 24 mm).
3. Remove the rotor by unscrewing the retaining screws and sliding it off the hub.
4. Install the new or resurfaced rotor, ensuring it's properly aligned and secured.

4. Inspect Suspension Components

Sub-steps:
1. Check for any visible damage to struts, control arms, and bushings.
2. If any components are worn or damaged, replace them as necessary.
3. Ensure all bolts are properly torqued to manufacturer specifications.

5. Wheel Alignment and Balancing

Sub-steps:
1. After reassembly, take the vehicle to a professional for wheel alignment and balancing to ensure proper handling and tire wear.

Tools Required:

Jack and jack stands
Socket set
Torque wrench
Brake cleaner
Screwdriver set

Parts Required:

Brake pads
Brake rotors (if needed)
Suspension components (if needed)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always disconnect the battery before working on the braking system.
Allow the brakes to cool before inspecting or replacing components.