why does my Renault Clio V (2019-Present) shake when accelerating

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

543 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems
•Allow the vehicle to cool before inspecting the exhaust system or engine components

Symptoms

•Vibrations felt through the steering wheel during acceleration
•Shaking felt in the driver's seat and floor
•Possible loss of power during acceleration
•Noises such as clunking or rattling when accelerating
•Uneven tire wear
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation pressure
2
Perform a visual inspection of the suspension components for damage or wear
3
Check for any error codes using an OBD-II scanner to identify potential engine or transmission issues
4
Inspect the driveshaft and CV joints for signs of damage or excessive play
5
Test the engine and transmission mounts for deterioration or failure
6
Perform a road test to correlate the shaking with specific speeds or conditions

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Tire balancer

Parts Required

•Tires (if needed)
•Suspension components (if worn)
•Driveshaft/CV joints (if damaged)
•Engine/transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation pressure
2
Perform a visual inspection of the suspension components for damage or wear
3
Check for any error codes using an OBD-II scanner to identify potential engine or transmission issues
4
Inspect the driveshaft and CV joints for signs of damage or excessive play
5
Test the engine and transmission mounts for deterioration or failure
6
Perform a road test to correlate the shaking with specific speeds or conditions

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace Tires (if necessary)

Sub-steps:
- Remove the wheel covers or hubcaps (if applicable).
- Loosen the lug nuts with a socket wrench.
- Lift the vehicle using a jack and secure it with jack stands.
- Remove the wheels and inspect for uneven wear or damage.
- Replace tires if they are worn or damaged, ensuring they are balanced properly.

3. Check and Replace Suspension Components

Sub-steps:
- Visually inspect the struts, shocks, and bushings for wear.
- Replace any worn or damaged suspension components.
- Ensure all bolts are torqued to manufacturer specifications.

4. Inspect and Replace Driveshaft and CV Joints (if necessary)

Sub-steps:
- Lift the vehicle and secure it with jack stands.
- Inspect the driveshaft for bends or cracks and the CV joints for boot damage.
- Replace any damaged driveshaft or CV joint; ensure proper installation according to service manual specifications.

5. Check and Replace Engine/Transmission Mounts (if necessary)

Sub-steps:
- Inspect engine and transmission mounts for signs of wear or cracking.
- Use a torque wrench to remove and replace mounts as necessary, adhering to manufacturer torque specifications.