why does my Renault Clio V (2019-Present) make a clicking sound when turning

Solution

1. Preparation

• Gather tools and parts required.
• Ensure the vehicle is on a level surface and securely supported with jack stands.
• Disconnect the battery to prevent any electrical issues.

2. Inspect and Replace CV Joints

• Tools Required: Socket set, torque wrench, CV joint removal tool, grease.
• Sub-steps:
  1. Remove the front wheel to access the CV joint.
  2. Inspect the outer CV joint boot for tears or grease leakage.
  3. If damaged, remove the axle nut using a socket wrench.
  4. Use a CV joint removal tool to detach the axle from the hub assembly.
  5. Replace the CV joint with a new one, applying grease as required.
  6. Reattach the axle to the hub and torque the axle nut to the manufacturer’s specifications (usually around 200 Nm).
  7. Reinstall the wheel and lower the vehicle.

3. Check and Replace Wheel Bearings

• Tools Required: Bearing puller, socket set, torque wrench, grease.
• Sub-steps:
  1. Remove the wheel and brake assembly to access the hub.
  2. Inspect the wheel bearing for any signs of wear or noise.
  3. If faulty, use a bearing puller to remove the old bearing.
  4. Install the new bearing and pack it with grease.
  5. Reassemble the brake assembly and wheel, torquing the bolts to specifications.

4. Inspect and Replace Suspension Components

• Tools Required: Socket set, torque wrench, suspension tool kit.
• Sub-steps:
  1. Inspect control arms, bushings, and struts for wear or damage.
  2. If damaged, remove the affected components using a socket set.
  3. Replace with new components and ensure all bolts are torqued to spec.
  4. Recheck the alignment of the suspension.