FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Renault Clio V (2019-Present) have a rough idle when cold - Renault Clio
Home/Cars/Renault/Clio/V (2019-Present)/why does my Renault Clio V (2019-Present) have a rough idle when cold

why does my Renault Clio V (2019-Present) have a rough idle when cold

Renault Clio V (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
505 words

Problem Statement

Learn how to diagnose and fix rough idle issues in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Rough idle when the engine is cold
  • •Engine stalling during initial start-up
  • •Check engine light illuminated
  • •Increased engine vibrations
  • •Poor fuel economy
  • •Difficulty starting in cold weather

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Throttle body cleaner
  • •Fuel pressure gauge

Parts Required

  • •Spark plugs
  • •Coolant temperature sensor (if faulty)
  • •Fuel filter (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative terminal of the battery to ensure safety.
  • Allow the engine to cool before starting work.
2. Inspect and Clean Throttle Body
  • Remove the air intake duct to access the throttle body.
  • Use throttle body cleaner and a soft cloth to clean any carbon deposits from the throttle body and butterfly valve.
  • Reinstall the air intake duct securely.
3. Replace Spark Plugs
  • Remove the ignition coils using a socket wrench.
  • Unscrew and replace old spark plugs with new ones, ensuring correct gap specification (typically 0.8-1.0 mm).
  • Reinstall the ignition coils and torque to the manufacturer's specification.
4. Test and Replace Coolant Temperature Sensor (if faulty)
  • Disconnect the electrical connector from the coolant temperature sensor.
  • Remove the sensor using a socket or wrench.
  • Install the new sensor, ensuring it is torqued to the manufacturer's specification.
  • Reconnect the electrical connector.
5. Check Fuel Pressure
  • Connect a fuel pressure gauge to the fuel rail.
  • Turn the ignition to the ON position without starting the engine to check fuel pressure.
  • If pressure is below specification, replace the fuel filter or fuel pump as needed.