why does my Renault Clio V (2019-Present) have a burning smell when I accelerate

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

581 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the burning smell during acceleration in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool completely before inspecting or working on components.

Symptoms

•Burning smell noticeable during acceleration
•Possible smoke emanating from the engine bay
•Loss of power or hesitation during acceleration
•Engine or transmission overheating
•Check engine light illuminated

Diagnostic Steps

1
Inspect under the hood for any visible signs of leaks or burnt components.
2
Scan the vehicle's onboard diagnostics using an OBD-II scanner for any error codes.
3
Check the engine oil level and condition; look for signs of contamination or burning.
4
Examine the transmission fluid level and condition; verify no leaks are present.
5
Inspect the exhaust system for any signs of blockage or damage.
6
Check for any signs of melted wiring or components around the engine and transmission.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket wrench
•Oil filter wrench
•Oil catch pan
•Socket set
•Fluid catch pan
•Funnel
•Multimeter
•Wire crimping tools
•OBD-II scanner

Parts Required

•Engine oil
•Transmission fluid
•Oil filter
•Transmission filter (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect under the hood for any visible signs of leaks or burnt components.
2
Scan the vehicle's onboard diagnostics using an OBD-II scanner for any error codes.
3
Check the engine oil level and condition; look for signs of contamination or burning.
4
Examine the transmission fluid level and condition; verify no leaks are present.
5
Inspect the exhaust system for any signs of blockage or damage.
6
Check for any signs of melted wiring or components around the engine and transmission.

Solution

1. Preparation

Gather tools and safety equipment.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical issues.

2. Inspect and Replace Engine Oil

Sub-steps:
1. Remove the oil drain plug using a socket wrench.
2. Drain the old oil into a suitable container.
3. Replace the oil filter using an oil filter wrench.
4. Install a new filter and ensure it is properly tightened.
5. Refill the engine with the correct type and amount of oil (refer to owner's manual for specifications).
Tools Required: Socket wrench, oil filter wrench, oil catch pan.

3. Inspect and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission fluid dipstick or fill plug.
2. Remove the dipstick and check fluid level and condition.
3. If fluid is low or burnt, drain the transmission fluid using a suitable container.
4. Replace the transmission filter if applicable.
5. Refill with the correct type of transmission fluid.
Tools Required: Socket set, fluid catch pan, funnel.

4. Check Wiring and Components

Sub-steps:
1. Visually inspect wiring harnesses for signs of melting or damage.
2. Check connectors for corrosion or loose connections.
3. Repair or replace damaged wiring as necessary.
Tools Required: Multimeter, wire crimping tools.

5. Inspect Exhaust System

Sub-steps:
1. Inspect the exhaust system for any visible damage or blockages.
2. Check for loose or damaged heat shields.
3. Replace any damaged components or tighten loose connections.
Tools Required: Socket set, exhaust pipe cutter (if replacement is needed).