why does my Renault Clio V (2019-Present) have a burning smell when driving

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

545 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the burning smell issue in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow the engine to cool before inspecting hoses or components related to the cooling system

Symptoms

•Burning smell noticeable inside or outside the vehicle
•Smoke or steam emanating from the engine bay or undercarriage
•Warning lights illuminated on the dashboard (e.g., oil pressure, temperature)
•Engine overheating
•Reduced performance or power loss

Diagnostic Steps

1
Inspect the engine bay for any visible signs of fluid leaks (oil, coolant, etc.)
2
Check the engine oil level and condition using the dipstick
3
Examine the brake system for signs of overheating, such as burned brake pads or smoking components
4
Scan for diagnostic trouble codes (DTCs) using an OBD-II scanner
5
Inspect the exhaust system for signs of oil leaks or burnt insulation
6
Check the belts and hoses for wear, damage, or burning

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Jack and jack stands
•Wrench set
•Torque wrench
•Fluid containers

Parts Required

•Engine oil (if needed)
•Coolant (if needed)
•Brake pads (if needed)
•Brake rotors (if needed)
•Belts or hoses (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the engine bay for any visible signs of fluid leaks (oil, coolant, etc.)
2
Check the engine oil level and condition using the dipstick
3
Examine the brake system for signs of overheating, such as burned brake pads or smoking components
4
Scan for diagnostic trouble codes (DTCs) using an OBD-II scanner
5
Inspect the exhaust system for signs of oil leaks or burnt insulation
6
Check the belts and hoses for wear, damage, or burning

Solution

1. Preparation

Gather all tools and parts needed for the repair.
Disconnect the battery to ensure safety during inspection and repair.

2. Fluid Inspection and Replacement

Oil Level Check
- Remove the dipstick, wipe it clean, reinsert, and remove again to check oil level.
- If low, top up with the manufacturer-recommended oil type.
Coolant Check
- Inspect the coolant reservoir; if low, add the correct coolant mixture.
- If there are leaks, replace the faulty hoses or connections.

3. Brake System Inspection

Remove Wheel
- Use a jack to lift the vehicle and secure it on jack stands.
- Remove the wheel using a socket set.
Inspect Brake Components
- Check brake pads for excessive wear and potential glazing.
- If pads are burned, replace them with OEM or high-quality aftermarket pads.
- Inspect brake rotors for warping or overheating signs; replace if necessary.

4. Exhaust System Inspection

Check Exhaust Components
- Inspect the exhaust manifold and pipes for oil residue or burnt areas.
- If damaged, replace the affected section of the exhaust system.

5. Belts and Hoses Inspection

Visual Inspection
- Check all belts for fraying, cracks, or signs of melting.
- Replace any damaged belts with new ones, ensuring proper tension.
Hoses
- Inspect hoses for leaks or signs of wear; replace as needed.