why does my Renault Clio V (2019-Present) feel like it's shaking when braking

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

503 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on brakes.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Vibration or shaking felt in the steering wheel when braking
•Pulsating brake pedal during braking
•Uneven wear on brake pads or rotors
•Noise (squealing or grinding) when braking
•Vehicle pulls to one side when braking

Diagnostic Steps

1
Inspect brake rotors for warping using a dial gauge or straightedge.
2
Check brake pads for uneven wear or damage.
3
Examine suspension components (control arms, bushings) for play or wear.
4
Verify wheel alignment and tire condition.
5
Scan for any fault codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake cleaner
•Brake pad spreader tool

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping using a dial gauge or straightedge.
2
Check brake pads for uneven wear or damage.
3
Examine suspension components (control arms, bushings) for play or wear.
4
Verify wheel alignment and tire condition.
5
Scan for any fault codes related to the braking system using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery to prevent any electrical issues.

2. Inspect and Replace Brake Rotors

Tools Required: Socket set, torque wrench, brake cleaner
Sub-steps:
1. Remove the wheel using a socket set.
2. Remove the brake caliper from the rotor, securing it with a bungee cord to avoid straining the brake line.
3. Remove the brake rotor by unscrewing the retaining screws (if applicable) and sliding it off the hub.
4. Inspect the rotor for warping or scoring; replace if necessary.
5. Clean the new rotor with brake cleaner before installation.

3. Inspect and Replace Brake Pads

Tools Required: Brake pad spreader tool
Sub-steps:
1. Remove the old brake pads from the caliper bracket.
2. Inspect for uneven wear; replace if necessary.
3. Install new brake pads, ensuring they are seated properly in the caliper bracket.

4. Reassemble

Sub-steps:
1. Reinstall the brake rotor and secure it with retaining screws.
2. Reattach the brake caliper over the new pads and torque the caliper bolts to the manufacturer's specifications.
3. Reinstall the wheel and torque the lug nuts to the proper specification.

5. Final Checks

Sub-steps:
1. Reconnect the battery.
2. Pump the brake pedal a few times to ensure proper brake pad seating.
3. Test drive the vehicle to ensure the shaking has been resolved.