my Renault Clio V (2019-Present) makes a clunking sound over bumps, what's wrong

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

508 words

Problem Statement

Learn how to diagnose and fix clunking noise in Renault Clio V suspension. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Wear safety glasses to protect your eyes from debris.

Symptoms

•Clunking noise from the suspension when driving over bumps
•Possible rattling sounds while driving on uneven surfaces
•Decreased ride comfort
•Visual inspection may show signs of wear or damage on suspension components
•Increased body roll during cornering

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear, damage, or loose fittings.
2
Check the condition of the strut mounts and bushings for degradation or play.
3
Perform a bounce test on the vehicle to observe the suspension's response.
4
Use a jack to lift the vehicle and check for play in the ball joints and tie rod ends.
5
Inspect the sway bar links and bushings for wear and proper installation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Screwdrivers
•Pliers

Parts Required

•Strut mounts
•Sway bar links
•Bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear, damage, or loose fittings.
2
Check the condition of the strut mounts and bushings for degradation or play.
3
Perform a bounce test on the vehicle to observe the suspension's response.
4
Use a jack to lift the vehicle and check for play in the ball joints and tie rod ends.
5
Inspect the sway bar links and bushings for wear and proper installation.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if working with electrical components.

2. Lift the Vehicle

Use a jack to raise the front or rear of the vehicle as needed.
Secure the vehicle with jack stands to ensure stability.

3. Inspect and Replace Components

Strut Mounts/Bushings:
- Remove the wheel to access the strut assembly.
- Inspect the strut mount for cracks or excessive wear.
- If damaged, remove the strut assembly by unbolting the top and bottom mounting points.
- Replace the strut mount and bushing with new parts.
- Reinstall the strut assembly and torque to manufacturer specifications.
Sway Bar Links and Bushings:
- Inspect sway bar links for any signs of wear or loosening.
- If damaged, remove the old sway bar link bolts using a socket set.
- Install the new sway bar link and tighten to the specified torque.

4. Reassemble and Lower the Vehicle

Reinstall the wheel and tighten lug nuts to the manufacturer’s torque specifications.
Remove the jack stands and lower the vehicle back to the ground.

5. Final Inspection

Perform a visual inspection to ensure all components are properly secured.
Reconnect the battery if it was disconnected.