FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Renault Clio V (2019-Present) keeps stalling at traffic lights, what should I check - Renault Clio
Home/Cars/Renault/Clio/V (2019-Present)/my Renault Clio V (2019-Present) keeps stalling at traffic lights, what should I check

my Renault Clio V (2019-Present) keeps stalling at traffic lights, what should I check

Renault Clio V (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
550 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix stalling issues in Renault Clio V (2019-present) at traffic lights. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on any components.

Symptoms

  • •Engine stalls unexpectedly at traffic lights
  • •Rough idle before stalling
  • •Difficulty restarting the engine after stalling
  • •Check engine light may illuminate intermittently
  • •Poor fuel economy observed
  • •Increased emissions may be detected

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Smoke machine
  • •Carburetor cleaner
  • •Soft brush
  • •Cleaning solvent

Parts Required

  • •Idle air control valve (if replacement is necessary)
  • •Air filter (if dirty or damaged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the negative terminal of the battery to ensure safety.
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Inspect and Clean the Idle Air Control Valve (IACV)
  • Tools Required: Socket set, cleaning solvent, soft brush
  • Remove the IACV from the intake manifold.
  • Clean the IACV with the cleaning solvent and a soft brush to remove carbon deposits.
  • Inspect the valve for wear or damage; replace if necessary.
  • Reinstall the IACV and reconnect electrical connectors.
3. Check for Vacuum Leaks
  • Tools Required: Smoke machine or carburetor cleaner
  • Use a smoke machine to introduce smoke into the intake system to identify leaks.
  • Alternatively, spray carburetor cleaner around intake hoses and gaskets while the engine is running; if RPM increases, a leak is present.
  • Tighten or replace any loose or damaged hoses.
4. Inspect the Air Filter
  • Tools Required: None (if easily accessible)
  • Remove the air filter cover and take out the air filter.
  • Check for dirt and blockages; replace with a new filter if necessary.
5. Battery and Charging System Check
  • Tools Required: Multimeter
  • Use a multimeter to test the battery voltage; it should read around 12.6 volts when fully charged.
  • Start the engine and check the voltage again; it should be between 13.7 to 14.7 volts to confirm the alternator is functioning properly.