my Renault Clio V (2019-Present) is stalling at traffic lights what should I do

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

513 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling issues in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Engine stalls when coming to a stop
•Rough idle prior to stalling
•Check engine light illuminated
•Difficulty restarting after stalling
•Poor acceleration after stalling

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any fault codes.
2
Inspect the air intake system for blockages or leaks.
3
Check the fuel system for proper pressure and fuel delivery.
4
Evaluate the idle air control valve (IAC) for proper functionality.
5
Inspect the throttle body for carbon buildup or malfunctions.
6
Examine the engine coolant temperature sensor for accurate readings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Throttle body cleaner
•Soft cloth and brush
•Fuel pressure gauge
•Multimeter
•Socket set

Parts Required

•Fuel filter (if applicable)
•Idle air control valve (if replaced)
•Engine coolant temperature sensor (if replaced)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any fault codes.
2
Inspect the air intake system for blockages or leaks.
3
Check the fuel system for proper pressure and fuel delivery.
4
Evaluate the idle air control valve (IAC) for proper functionality.
5
Inspect the throttle body for carbon buildup or malfunctions.
6
Examine the engine coolant temperature sensor for accurate readings.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety during repairs.
Allow the engine to cool before working on components.

2. Inspect and Clean the Throttle Body

Remove the air intake duct from the throttle body.
Use throttle body cleaner and a soft cloth to clean the throttle plate and surrounding area.
Ensure the throttle plate moves freely without obstruction.
Reinstall the air intake duct securely.

3. Check and Clean the Idle Air Control Valve (IAC)

Locate the IAC on the intake manifold.
Disconnect the electrical connector and remove the valve.
Clean the IAC valve using a suitable cleaner and a soft brush.
Reinstall the IAC valve and reconnect the electrical connector.

4. Test the Fuel System

Use a fuel pressure gauge to check for proper fuel pressure at the fuel rail.
If pressure is low, inspect the fuel pump and filter for blockage or failure.
Replace the fuel filter if necessary and ensure the fuel pump is functioning properly.

5. Inspect Engine Coolant Temperature Sensor

Locate the coolant temperature sensor and disconnect the electrical connector.
Use a multimeter to test the resistance of the sensor. Compare readings to manufacturer specifications.
Replace the sensor if readings are outside the acceptable range.