FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Renault Clio V (2019-Present) is hesitating when I accelerate what to check - Renault Clio
Home/Cars/Renault/Clio/V (2019-Present)/my Renault Clio V (2019-Present) is hesitating when I accelerate what to check

my Renault Clio V (2019-Present) is hesitating when I accelerate what to check

Renault Clio V (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
526 words

Problem Statement

Learn how to diagnose and fix acceleration hesitation in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool down before opening any components.

Symptoms

  • •Engine hesitation during acceleration
  • •Reduced engine power
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough idle at stoplights

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Throttle body cleaner
  • •Fuel pressure gauge
  • •Spark plug socket

Parts Required

  • •Air filter
  • •Spark plugs
  • •Fuel filter (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
  • Allow the engine to cool down before starting work.
2. Inspect and Replace Air Filter
  • Remove the air filter housing cover using a socket set.
  • Take out the old air filter and inspect it for dirt and obstructions.
  • Install a new air filter, ensuring it is properly seated.
  • Reattach the air filter housing cover and secure it.
3. Clean the Throttle Body
  • Remove the intake duct connected to the throttle body.
  • Use throttle body cleaner and a soft brush to clean the throttle body and the plate.
  • Ensure no cleaner residue is left inside the throttle body.
  • Reattach the intake duct securely.
4. Test and Replace Spark Plugs (if necessary)
  • Remove the ignition coils using a socket set.
  • Pull out the spark plugs using a spark plug socket.
  • Inspect the spark plugs for wear; replace if worn or fouled.
  • Install new spark plugs to the specified torque (usually around 12-15 ft-lbs).
  • Reinstall the ignition coils.
5. Check and Replace Fuel Filter (if necessary)
  • Locate and remove the fuel filter according to the manufacturer’s guidelines.
  • Install a new fuel filter, ensuring the flow direction is correct.
  • Reconnect the fuel lines and check for leaks.