my Renault Clio V (2019-Present) has a burning smell when driving what should I do

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

501 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix burning smell issues in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool down before performing any inspection or repairs.

Symptoms

•Burning smell, potentially related to oil or electrical components
•Smoke coming from under the hood or wheel wells
•Overheating engine temperature gauge
•Possible warning lights illuminated on the dashboard
•Decreased engine performance or power loss

Diagnostic Steps

1
Perform a visual inspection for any obvious signs of leaks or damaged components.
2
Check fluid levels, including engine oil, coolant, and brake fluid.
3
Scan the vehicle’s onboard computer for error codes using an OBD-II scanner.
4
Inspect the engine bay for any obvious electrical issues, such as frayed wires or burnt insulation.
5
Examine the brakes for signs of overheating, such as a glazed rotor or burnt brake pads.
6
Monitor the engine temperature gauge during operation to identify any overheating issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Brake pad spreader
•Torque wrench
•Degreaser

Parts Required

•Brake pads (if worn)
•Brake rotors (if glazed)
•Electrical connectors or wiring (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Perform a visual inspection for any obvious signs of leaks or damaged components.
2
Check fluid levels, including engine oil, coolant, and brake fluid.
3
Scan the vehicle’s onboard computer for error codes using an OBD-II scanner.
4
Inspect the engine bay for any obvious electrical issues, such as frayed wires or burnt insulation.
5
Examine the brakes for signs of overheating, such as a glazed rotor or burnt brake pads.
6
Monitor the engine temperature gauge during operation to identify any overheating issues.

Solution

1. Preparation

Gather necessary tools and safety gear.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts during inspection.

2. Inspect and Clean Components

Inspect Engine Bay:
- Look for oil leaks around the engine and seals.
- Check for burnt wiring or melted insulation.
Clean Affected Areas:
- Use a degreaser to clean any oil or debris buildup around the engine.

3. Replace Worn Components

Brake Inspection:
- Remove the wheel to access the brake components.
- Inspect brake pads and rotors; replace if they show signs of glazing or excessive wear.
Electrical Repairs:
- Repair or replace any damaged wiring or connectors found during inspection.

4. Refill Fluids

Engine Oil:
- If oil levels are low, refill with manufacturer-recommended oil specification.
Coolant:
- Fill the cooling system with the appropriate coolant mixture, checking for leaks.

5. Reconnect and Test

Reconnect the battery.
Start the engine and allow it to idle, monitoring for any burning smells or smoke.
Test drive the vehicle to ensure no further burning smell is present.