how to troubleshoot my Renault Clio V (2019-Present) remote start not working

Solution

1. Preparation

• Gather all necessary tools and parts.
• Ensure the vehicle is parked safely and that the engine is off.
• Disconnect the vehicle battery to avoid electrical issues during troubleshooting.

2. Replace Key Fob Battery

• Sub-steps:
  1. Open the key fob using a flathead screwdriver.
  2. Remove the old battery (typically a CR2032).
  3. Insert a new battery, ensuring correct polarity.
  4. Reassemble the key fob and test the remote start function.

3. Inspect Vehicle Settings

• Sub-steps:
  1. Turn on the ignition (do not start the engine).
  2. Navigate to the vehicle settings on the infotainment screen.
  3. Locate the remote start option and ensure it is enabled.
  4. Save any changes and exit the settings menu.

4. Check Battery Voltage

• Tools Required: Multimeter
• Sub-steps:
  1. Reconnect the vehicle battery if it was disconnected.
  2. Use a multimeter to check the battery voltage; it should be around 12.6 volts or higher.
  3. If the voltage is low, charge or replace the battery as necessary.

5. Test and Reset Remote Start System

• Sub-steps:
  1. Turn off the ignition and remove the key.
  2. Disconnect and reconnect the vehicle’s battery to reset the remote start system.
  3. Attempt to start the vehicle remotely to verify functionality.