how to reset the service light on Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the service light on your Renault Clio V (2019-present) with this easy step-by-step guide. Ensure your dashboard is clear and ready to go.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before attempting to reset the service light.

Symptoms

•Service light remains illuminated on the dashboard
•No error codes indicated in the system
•Vehicle has recently undergone maintenance

Diagnostic Steps

1
Ensure the vehicle is in the OFF position.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Locate the trip computer button on the dashboard.
4
Turn the ignition to the ON position without starting the engine.
5
Hold down the trip computer button until the service light begins to flash.
6
Release the trip computer button once the service light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the OFF position.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Locate the trip computer button on the dashboard.
4
Turn the ignition to the ON position without starting the engine.
5
Hold down the trip computer button until the service light begins to flash.
6
Release the trip computer button once the service light resets.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a flat surface and is in "Park" or neutral.

2. Access Ignition

Insert the key into the ignition or have the key fob ready to press the start button.
Turn the ignition ON without starting the engine.

3. Reset the Service Light

Locate the trip computer button on the dashboard (often found near the speedometer).
Press and hold the trip computer button.
While holding the button, turn the ignition ON (but do not start the engine).
Keep holding the button until the service light starts to flash, then release it.
Confirm that the service light has turned off.