how to reset the service light on my Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

425 words

Problem Statement

Learn how to reset the service light on your Renault Clio V (2019-present) with this step-by-step guide. Ensure your dashboard is clear of warnings.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset process.

Symptoms

•Service light remains illuminated on the dashboard
•No other warning lights are displayed
•Vehicle has undergone recent maintenance
•Engine runs normally without issues

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'OK' button on the steering wheel to access the main menu on the dashboard display.
3
Navigate to the 'Settings' option using the arrow buttons.
4
Select 'Vehicle Settings' from the menu.
5
Choose the 'Service Interval' option to view the current service status.
6
Follow the prompts to reset the service light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required, but an OBD-II scanner can be useful for additional diagnostics.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'OK' button on the steering wheel to access the main menu on the dashboard display.
3
Navigate to the 'Settings' option using the arrow buttons.
4
Select 'Vehicle Settings' from the menu.
5
Choose the 'Service Interval' option to view the current service status.
6
Follow the prompts to reset the service light.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Close all doors and ensure the seatbelt is fastened.
Have the vehicle key or fob ready.

2. Accessing the Settings

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Locate the "OK" button on the steering wheel and press it to bring up the dashboard menu.
Use the left or right arrow buttons to scroll through the options until "Settings" is displayed.
Press "OK" to enter the Settings menu.

3. Resetting the Service Light

Scroll down to "Vehicle Settings" and select it by pressing "OK."
Look for "Service Interval" or "Maintenance" and select this option.
You will see the current service status. Follow the prompts to reset it.
Confirm the reset when prompted by selecting "Yes."

4. Finalizing

Turn off the ignition and remove the key from the ignition.
Wait for a few seconds and then start the engine to ensure the service light is no longer illuminated.