how to reset the service light in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

285 words

Problem Statement

Learn how to reset the service light on your Renault Clio V (2019-Present) with this step-by-step guide. Quick and easy instructions for maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

1
Ensure the vehicle is parked in a safe location and turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the brake pedal and hold it down.
4
Turn the ignition key to the 'ON' position while still holding the brake pedal.
5
Wait for the service light to flash and then turn off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked in a safe location and turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the brake pedal and hold it down.
4
Turn the ignition key to the 'ON' position while still holding the brake pedal.
5
Wait for the service light to flash and then turn off.

Solution

1. Preparation

2. Resetting the Service Light

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Press and hold the brake pedal.
While holding the brake pedal, turn the ignition key to the "ON" position.
Observe the dashboard for the service light to flash and then turn off.
Release the brake pedal and turn off the ignition.