how to reset the oil change light in my Renault Clio V (2019-Present)?

Renault Clio V (2019-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

394 words

Problem Statement

Learn how to reset the oil change light in your Renault Clio V (2019-Present) with this step-by-step guide. Ensure accurate maintenance notifications.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before starting the reset procedure.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance reminder displays incorrect service intervals
•No oil change notification after performing an oil change

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Locate the trip reset button on the dashboard.
4
Press and hold the trip reset button until the service light begins to blink, then release it.
5
Press the trip reset button again until the oil change light resets to indicate maintenance is completed.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Locate the trip reset button on the dashboard.
4
Press and hold the trip reset button until the service light begins to blink, then release it.
5
Press the trip reset button again until the oil change light resets to indicate maintenance is completed.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the ignition is off.
Gather the necessary tools: key fob or ignition key.

2. Ignition Setup

Insert the key into the ignition.
Turn the key to the "On" position without starting the engine. This allows access to the dashboard menu.

3. Reset Procedure

Locate the trip reset button, usually found on the instrument cluster.
Press and hold the trip reset button until the oil change light starts to blink. This may take a few seconds.
Release the button and press it again to confirm the reset. The oil change light should turn off.

4. Verification

Turn off the ignition and then start the engine to verify that the oil change light is no longer illuminated.