how to fix the P0760 code in my Renault Clio V (2019-Present)

Solution

1. Preparation

• Gather tools and parts required.
• Disconnect the negative battery terminal to prevent electrical shorts.
• Ensure the vehicle is on a level surface and secure it with wheel chocks.

2. Drain Transmission Fluid

• Remove the transmission fluid pan bolts using a socket set.
• Carefully lower the pan and allow the old fluid to drain completely into a suitable container.
• Clean the magnet in the pan of any metal debris.

3. Remove the Shift Solenoid "C"

• Locate the shift solenoid "C" as per the vehicle’s service manual.
• Disconnect the electrical connector from the solenoid.
• Remove the retaining bolts using a socket wrench.
• Carefully pull the solenoid out of its housing.

4. Install New Shift Solenoid

• Insert the new shift solenoid "C" into the housing.
• Secure it with the retaining bolts and torque them to the manufacturer’s specifications.
• Reconnect the electrical connector ensuring a tight fit.

5. Reassemble and Refill Transmission Fluid

• Clean the transmission pan and install a new gasket if required.
• Reattach the transmission fluid pan and torque the bolts to specifications.
• Refill the transmission with the appropriate fluid type, ensuring it is filled to the correct level.

6. Reconnect Battery and Test

• Reconnect the negative battery terminal.
• Start the engine and let it warm up.
• Verify the operation of the transmission shifting through all gears.