FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Renault/Clio/V (2019-Present)/how to fix the P0301 misfire code in Renault Clio V (2019-Present)

how to fix the P0301 misfire code in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03012-4 hours
4 min read
631 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0301 cylinder 1 misfire in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0301
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before opening any components related to the engine.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Decreased acceleration
  • •Poor fuel economy
  • •Engine stalling during operation

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0301 and check for any additional codes.
  2. 2Inspect the spark plug in cylinder 1 for wear or damage.
  3. 3Check the ignition coil for proper function by swapping it with an adjacent cylinder.
  4. 4Evaluate fuel injector operation in cylinder 1.
  5. 5Perform a compression test on cylinder 1 to check for mechanical issues.
  6. 6Inspect vacuum lines and intake manifold for leaks that could affect the air-fuel mixture.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
  • Allow the engine to cool before beginning any work.

2. Replace Spark Plug

  • Remove the ignition coil from cylinder 1:
    • Unplug the electrical connector.
    • Unscrew the retaining bolts and lift the coil out.
  • Remove the spark plug:
    • Use a spark plug socket and ratchet to unscrew the spark plug from the cylinder head.
  • Install a new spark plug:
    • Ensure the spark plug gap is correct according to manufacturer specifications.
    • Screw in the new spark plug by hand first, then torque to the manufacturer’s specification (typically around 20 Nm).
  • Reinstall the ignition coil:
    • Place the coil back into position and secure it with bolts.
    • Reconnect the electrical connector.

3. Inspect and Replace Ignition Coil (if necessary)

  • If the ignition coil was swapped during diagnostics and the misfire moved to the other cylinder, replace the faulty ignition coil.
  • Follow the same steps as above for removal and installation.

4. Clean or Replace Fuel Injector

  • If injector performance is suspect, remove the fuel injector from cylinder 1:
    • Release fuel pressure by removing the fuel pump fuse and starting the engine until it stalls.
    • Disconnect the fuel line and electrical connector from the injector.
    • Remove the retaining clips and pull the injector out.
  • Clean the injector using a dedicated fuel injector cleaner or replace it with a new one.
  • Reinstall the injector into the cylinder head and reattach the fuel line and electrical connector.

5. Compression Test

  • If misfire persists, perform a compression test:
    • Remove the spark plug and connect the compression tester to the spark plug hole.
    • Crank the engine and record the compression reading.
    • Compare results to specifications (typically 12-15 bar).
  • If compression is low, further investigation into valve seals or piston rings may be necessary.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Compression tester
  • •Fuel injector cleaning kit

Parts Required

  • •Spark plug (for cylinder 1)
  • •Ignition coil (if faulty)
  • •Fuel injector (if faulty)

Additional Information

Error Code
P0301
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

  1. how to clear the engine codes on my Renault Clio V (2019-Present)

    Learn how to clear engine codes on your Renault Clio V (2019-Present) with this step-by-step guide. Ensure your check engine light is off and maintain your vehicle.

    Electrical3 symptoms

  2. why does my Renault Clio V (2019-Present) air conditioning smell musty

    Learn how to diagnose and fix musty odors in the A/C system of your Renault Clio V. Step-by-step guide with symptoms, tools, and repair instructions.

    HVAC5 symptoms

  3. why does my Renault Clio V's air conditioning smell musty?

    Learn how to diagnose and fix musty smell in AC system of Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    HVAC5 symptoms

  4. my Renault Clio V's fuel gauge is inaccurate, what can I do?

    Learn how to diagnose and fix an inaccurate fuel gauge in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System5 symptoms

  5. how to check fuses in a Renault Clio V (2019-Present)

    Learn how to check and replace fuses in Renault Clio V (2019-Present) to resolve electrical issues. Step-by-step guide with diagnostic procedures.

    Electrical5 symptoms

  6. how to replace the alternator in Renault Clio V (2019-Present)

    Step-by-step guide on how to replace the alternator in Renault Clio V (2019-Present). Includes symptoms, diagnostic steps, tools, and safety warnings.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation