FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Renault/Clio/V (2019-Present)/how to fix P0700 transmission code in Renault Clio V (2019-Present)

how to fix P0700 transmission code in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07002-4 hours
3 min read
582 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission fault in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Component
Transmission
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine and transmission to cool before performing any inspection or repairs.

Symptoms

  • •Check engine light illuminated
  • •Transmission shifting issues (harsh or delayed shifts)
  • •Loss of acceleration or power during driving
  • •Unusual noises from the transmission
  • •Transmission overheating warning
  • •Fluid leaks under the vehicle

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the presence of P0700 and any additional transmission-related codes.
  2. 2Inspect the transmission fluid level and condition; low or dirty fluid can cause transmission issues.
  3. 3Check the wiring and connectors leading to the transmission control module for any signs of damage or corrosion.
  4. 4Conduct a visual inspection of the transmission for fluid leaks or physical damage.
  5. 5Test the transmission solenoids using a multimeter to ensure they are functioning correctly.
  6. 6Perform a road test to replicate the symptoms and observe the transmission behavior.

Solution

Solution

1. Preparation

  • Gather tools and parts required for the repair.
  • Ensure the vehicle is on a level surface and secure it with wheel chocks.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Transmission Fluid

  • Sub-steps:
    1. Remove the transmission fluid drain plug using a socket wrench.
    2. Allow the old fluid to completely drain into a suitable container.
    3. Replace the drain plug and torque to manufacturer's specifications (usually around 25 Nm).
    4. Refill the transmission with the manufacturer-recommended fluid through the fill tube until it reaches the proper level.

3. Inspect and Repair Wiring

  • Sub-steps:
    1. Visually inspect all wiring harnesses and connectors for wear or damage.
    2. Repair or replace any damaged wires or connectors to ensure a secure connection.
    3. Apply dielectric grease to connectors to prevent corrosion.

4. Test Transmission Solenoids

  • Sub-steps:
    1. Disconnect the electrical connector from the solenoid assembly.
    2. Use a multimeter to measure the resistance of each solenoid. Compare against specifications in the service manual (typically 20-30 ohms).
    3. Replace any solenoids that do not meet the specifications.

5. Clear Codes and Test Drive

  • Sub-steps:
    1. Reconnect the negative battery terminal.
    2. Use the OBD-II scanner to clear the P0700 code and other relevant codes.
    3. Conduct a test drive to ensure that the transmission functions properly and no codes reappear.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Multimeter
  • Torque wrench
  • Screwdrivers

Parts Required

  • Transmission fluid (specific to Renault specifications)
  • Transmission solenoids (if needed)

Additional Information

Error CodeP0700
Component

Transmission

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

2 items

Related Faults

  1. how to fix the air conditioning not working in Renault Clio V

    Learn how to diagnose and fix air conditioning issues in Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    HVAC6 symptoms

  2. how to fix the defroster not working in my Renault Clio V (2019-Present) during winter?

    Learn how to fix the defroster not working in your Renault Clio V. Step-by-step guide with diagnostic steps, tools required, and repair instructions.

    HVAC5 symptoms

  3. how to test the alternator in a Renault Clio V (2019-Present)

    Learn how to test the alternator in a Renault Clio V (2019-Present) with step-by-step diagnostic procedures and solutions for electrical issues.

    Electrical5 symptoms

  4. why does my Renault Clio V (2019-Present) make a hissing noise when starting

    Learn to diagnose and fix the hissing noise during startup in Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  5. how to replace the alternator in Renault Clio V (2019-Present)

    Step-by-step guide on how to replace the alternator in Renault Clio V (2019-Present). Includes symptoms, diagnostic steps, tools, and safety warnings.

    Electrical5 symptoms

  6. how to fix P0171 code in Renault Clio V (2019-Present)

    Learn how to diagnose and fix P0171 engine too lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation