FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix P0174 code in Renault Clio V (2019-Present) - Renault Clio
Home/Cars/Renault/Clio/V (2019-Present)/how to fix P0174 code in Renault Clio V (2019-Present)

how to fix P0174 code in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0174
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
514 words

Problem Statement

Learn how to diagnose and fix P0174 engine lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before inspecting or working on the fuel system.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or stalling
  • •Decreased engine performance
  • •Poor fuel economy
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Multimeter
  • •Socket set
  • •Screwdriver set

Parts Required

  • •Air intake hoses (if damaged)
  • •MAF sensor (if faulty)
  • •Fuel injectors (if clogged or damaged)
  • •Fuel filter (if needed)

Additional Information

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the vehicle battery to prevent any electrical issues.
  • Ensure the vehicle is on a level surface and has cooled down.
2. Inspect Air Intake System
  • Remove the air intake duct.
  • Check for any visible cracks or damage in the intake hoses.
  • Replace any damaged hoses or connections.
  • Reinstall the air intake duct securely.
3. Check Fuel Pressure
  • Connect a fuel pressure gauge to the fuel rail.
  • Start the engine and monitor the fuel pressure; it should match the specifications in the service manual (typically around 3-4 bar).
  • If the pressure is low, inspect the fuel pump and fuel filter for issues. Replace if necessary.
4. Test MAF Sensor
  • Disconnect the MAF sensor connector.
  • Use a multimeter to check for proper voltage output while the engine is running.
  • If the readings are out of range, replace the MAF sensor.
5. Inspect Fuel Injectors
  • Remove the fuel rail to access the injectors.
  • Visually inspect each injector for clogs or leaks.
  • Clean or replace any faulty injectors.
6. Examine Exhaust System
  • Inspect the exhaust manifold and pipes for any visible leaks or cracks.
  • Repair or replace any damaged components to ensure proper exhaust flow.