how to fix P0130 oxygen sensor code on Renault Clio V (2019-Present)

Solution

1. Preparation

• Gather tools and parts required for the repair.
• Disconnect the vehicle battery to prevent electrical shorts.
• Ensure the engine is cool before starting work.

2. Remove the Oxygen Sensor

• Locate the upstream oxygen sensor on the exhaust manifold.
• Use a socket wrench with an oxygen sensor socket to carefully unscrew and remove the sensor.
• Disconnect the electrical connector from the sensor.

3. Inspect and Clean

• Inspect the threads of the sensor and the wiring harness for any signs of damage.
• Clean the sensor mounting area on the exhaust manifold to ensure a proper seal when installing the new sensor.

4. Install New Oxygen Sensor

• Apply anti-seize compound to the threads of the new oxygen sensor (if applicable).
• Install the new oxygen sensor by screwing it into the exhaust manifold and tightening it securely (typically to 30 Nm).
• Reconnect the electrical connector to the new sensor.

5. Reconnect Battery and Test

• Reconnect the vehicle's battery.
• Start the engine and allow it to reach operating temperature.
• Use the OBD-II scanner to clear the P0130 code and monitor for any reoccurrence.