FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Renault/Clio/V (2019-Present)/how to fix P0130 code in Renault Clio V (2019-Present)

how to fix P0130 code in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01301-2 hours
3 min read
527 words

Problem Statement

Learn how to diagnose and fix P0130 oxygen sensor circuit issues in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0130
Component
Exhaust System
Repair Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before handling any exhaust components.

Symptoms

  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough idle
  • •Increased emissions
  • •Engine stalling or hesitation during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0130 and check for any other related codes.
  2. 2Inspect the wiring and connectors leading to the oxygen sensor for any visible damage or corrosion.
  3. 3Measure the voltage output of the oxygen sensor using a multimeter to determine if it is within the expected range (typically 0.1 to 0.9 volts).
  4. 4Check for exhaust leaks before the oxygen sensor that could affect its readings.
  5. 5Test the heater circuit of the oxygen sensor, ensuring it is receiving the appropriate voltage (usually around 12 volts).
  6. 6Inspect the ECU for any grounding issues or faults affecting the oxygen sensor circuit.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shock.
  • Allow the vehicle to cool down if the engine has been running.

2. Remove Oxygen Sensor

  • Locate the upstream oxygen sensor (usually found in the exhaust manifold or front pipe).
  • Use an oxygen sensor socket to unscrew the sensor from its location.
  • Disconnect the electrical connector from the sensor.

3. Inspect and Replace

  • Inspect the old sensor for signs of damage or contamination.
  • If the sensor is faulty, install the new oxygen sensor:
    • Apply anti-seize compound to the threads of the new sensor (if not pre-coated).
    • Screw the sensor into the exhaust system and tighten it to the manufacturer’s specified torque (usually around 30-40 Nm).
    • Reconnect the electrical connector securely.

4. Clear Codes and Reconnect Battery

  • Reconnect the negative battery terminal.
  • Use the OBD-II scanner to clear the P0130 code from the ECU.

5. Test Drive

  • Start the engine and allow it to reach operating temperature.
  • Conduct a test drive to ensure the engine runs smoothly and the check engine light remains off.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Oxygen sensor socket
  • Torque wrench
  • Anti-seize compound

Parts Required

  • New upstream oxygen sensor
  • Electrical connector (if damaged)

Additional Information

Error CodeP0130
Component

Exhaust System

Repair Time

1-2 hours

Difficulty

medium

Severity

medium

Tools

5 items

Parts

2 items

Related Faults

  1. my Renault Clio V's cruise control isn't working, what might be the cause?

    Learn how to diagnose and fix cruise control issues in Renault Clio V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms
  2. how to fix P0171 code in Renault Clio V (2019-Present)?

    Learn how to diagnose and fix P0171 engine lean condition in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine5 symptoms
  3. why does my Renault Clio V (2019-Present) engine make a knocking noise when accelerating

    Learn how to diagnose and fix engine knocking noise in Renault Clio V (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms
  4. why is my Renault Clio V (2019-Present) making a grinding noise when turning

    Learn how to diagnose and fix grinding noise when turning in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    Steering5 symptoms
  5. how to fix P0011 code in Renault Clio V (2019-Present)?

    Learn how to diagnose and fix P0011 VVT issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    P0011Engine5 symptoms
  6. how to fix B0090 code in Renault Clio V (2019-Present)

    Learn how to diagnose and fix B0090 airbag circuit issues in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

    B0090Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation