how to fix P0130 code in Renault Clio V (2019-Present)?

Solution

1. Preparation

• Gather tools and safety equipment.
• Disconnect the vehicle's battery to ensure safety while working on electrical components.
• Raise the vehicle securely if the oxygen sensor is located under the vehicle.

2. Inspect and Repair Wiring

• Check the oxygen sensor wiring harness for frays or breaks.
  • If damaged, repair or replace the wiring as necessary.
• Ensure all connectors are seated properly and free of corrosion.

3. Test and Replace Oxygen Sensor

• Tools Required: OBD-II scanner, multimeter, socket set, oxygen sensor wrench.
• Locate the oxygen sensor (typically near the exhaust manifold).
• Disconnect the sensor connector.
• Using a multimeter, measure the voltage output of the sensor:
  • A functioning sensor should fluctuate between 0.1 and 0.9 volts.
• If the voltage is out of the specified range, proceed to replace the oxygen sensor.
  • Using the oxygen sensor wrench, unscrew the old sensor and install the new one, tightening to the manufacturer's specifications (usually around 30 Nm).
  • Reconnect the sensor’s electrical connector.

4. Clear Codes and Test Drive

• Reconnect the vehicle's battery.
• Use the OBD-II scanner to clear the P0130 code and any other error codes.
• Test drive the vehicle under various conditions to ensure the code does not return and the symptoms have been resolved.