why does my Ram 1500 DT (2019-Present) transmission slip during acceleration

Ram 1500 DT (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

524 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping during acceleration in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission fluid system.

Symptoms

•Transmission slips during acceleration
•Engine RPMs increase without a corresponding increase in speed
•Harsh or jerky shifting
•Check engine light may be illuminated
•Fluid leaks under the vehicle
•Unusual noises (grinding or whining) from transmission area

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or metal shavings.
4
Examine the transmission filter for blockages.
5
Inspect the wiring and connectors related to the transmission control module.
6
Test the throttle position sensor for proper function using a multimeter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Fluid catch pan

Parts Required

•Transmission filter
•Transmission fluid (specific to Ram 1500)
•Gasket for transmission pan

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or metal shavings.
4
Examine the transmission filter for blockages.
5
Inspect the wiring and connectors related to the transmission control module.
6
Test the throttle position sensor for proper function using a multimeter.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and secure with jack stands.
Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Sub-steps:
- Locate the transmission dipstick and remove it to check fluid level.
- If low, add the specified transmission fluid type per the owner's manual.
- If the fluid is dark or burned, proceed to the next steps.

3. Change Transmission Filter

Sub-steps:
- Remove the transmission pan by unscrewing the bolts (use a socket set).
- Allow fluid to drain completely into a pan.
- Remove the old filter and replace it with a new one.
- Clean the transmission pan and magnet to remove debris.
- Reinstall the transmission pan with a new gasket and torque bolts to the manufacturer specifications.

4. Inspect and Repair Wiring/Connections

Sub-steps:
- Examine all wiring harnesses and connectors for corrosion or damage.
- Clean or repair any faulty connections.
- Test the throttle position sensor and replace it if defective.

5. Refill Transmission Fluid

Sub-steps:
- Pour the recommended type of transmission fluid through the dipstick tube until it reaches the proper level.
- Start the engine and cycle through gears to ensure fluid circulates properly.
- Check fluid level again and top off if necessary.