FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ram 1500 DT (2019-Present) engine light come on and off - Ram 1500
Home/Cars/Ram/1500/DT (2019-Present)/why does my Ram 1500 DT (2019-Present) engine light come on and off

why does my Ram 1500 DT (2019-Present) engine light come on and off

Ram 1500 DT (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
580 words

Problem Statement

Discover how to diagnose and fix the intermittent engine light issue on your Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic steps and solutions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Relieve fuel system pressure before servicing fuel injectors.

Symptoms

  • •Check engine light illuminated intermittently
  • •Engine misfires or runs rough
  • •Decreased fuel efficiency
  • •Unusual engine noises (e.g., knocking or pinging)
  • •Poor acceleration or power loss
  • •Emissions test failure (if applicable)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Fuel injector removal tool
  • •Anti-seize lubricant
  • •O-ring lubricant

Parts Required

  • •Spark plugs
  • •Fuel injectors (if replacement is needed)
  • •Gas cap (if damaged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the negative battery terminal.
  • Gather necessary tools and parts.
2. Inspect and Replace Spark Plugs
  • Tools Required: Socket set, torque wrench, spark plug socket, anti-seize lubricant.
  • Remove the engine cover if necessary.
  • Disconnect the ignition coils and remove them.
  • Extract the spark plugs using a spark plug socket.
  • Inspect the spark plugs for wear; replace if needed.
  • Apply anti-seize lubricant on the threads of the new spark plugs.
  • Torque the new spark plugs to the manufacturer’s specifications (typically around 13-15 lb-ft).
  • Reinstall the ignition coils and engine cover.
3. Check and Replace Fuel Injectors
  • Tools Required: Fuel injector removal tool, O-ring lubricant.
  • Relieve fuel system pressure by removing the fuel pump fuse and running the engine until it stalls.
  • Disconnect the fuel lines and electrical connectors from the injectors.
  • Remove the fuel rail and injectors.
  • Inspect and clean or replace the fuel injectors as necessary.
  • Lubricate new O-rings with clean engine oil and reinstall injectors into the fuel rail.
  • Reattach the fuel rail and reconnect fuel lines and electrical connectors.
4. Inspect the Gas Cap
  • Remove the gas cap and inspect for cracks or damage.
  • Replace the gas cap if it does not seal properly.
  • Ensure the gas cap clicks securely when reinstalled.
5. Final Checks
  • Reconnect the negative battery terminal.
  • Clear any stored trouble codes using the OBD-II scanner.