what does it mean if my Ram 1500 DT (2019-Present) is throwing code C0035?

Ram 1500 DT (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

Error Code: C0035

3 min read

525 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0035 left front wheel speed sensor issues in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0035

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Check engine light illuminated
•ABS (Anti-lock Braking System) warning light activated
•Traction control warning light illuminated
•Erratic speedometer readings
•Possible loss of ABS functionality
•Increased stopping distances in wet conditions

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to confirm the C0035 code.
2
Inspect the left front wheel speed sensor wiring and connectors for damage or corrosion.
3
Measure the resistance of the left front wheel speed sensor using a multimeter to ensure it is within specification.
4
Check the continuity of the wiring from the sensor to the ABS module.
5
Inspect the ABS module for any stored codes or faults that may affect the sensor.
6
Verify the proper functioning of the wheel bearing assembly, as it may affect the sensor's operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Basic hand tools

Parts Required

•Left front wheel speed sensor

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to confirm the C0035 code.
2
Inspect the left front wheel speed sensor wiring and connectors for damage or corrosion.
3
Measure the resistance of the left front wheel speed sensor using a multimeter to ensure it is within specification.
4
Check the continuity of the wiring from the sensor to the ABS module.
5
Inspect the ABS module for any stored codes or faults that may affect the sensor.
6
Verify the proper functioning of the wheel bearing assembly, as it may affect the sensor's operation.

Solution

1. Preparation

Gather tools: OBD-II scanner, multimeter, socket set, and basic hand tools.
Ensure the vehicle is on a flat surface and the parking brake is engaged.

2. Remove the Wheel

Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the lug nuts using a socket set and take off the left front wheel.

3. Inspect and Replace the Wheel Speed Sensor

Locate the left front wheel speed sensor mounted on the wheel hub.
Disconnect the electrical connector from the sensor.
Remove the sensor retaining bolt using a socket.
Carefully pull out the sensor from the hub assembly.
Tools Required: Socket set, torque wrench.

4. Install the New Sensor

Insert the new wheel speed sensor into the hub assembly.
Secure it with the retaining bolt and tighten to the manufacturer's torque specifications (typically around 8-10 Nm).
Reconnect the electrical connector ensuring it clicks into place.

5. Reassemble the Wheel

Reinstall the left front wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and torque the lug nuts to the manufacturer's specifications (typically around 100-110 Nm).

6. Clear Codes and Test Drive

Use the OBD-II scanner to clear the C0035 code.
Perform a test drive to ensure the ABS and traction control systems are functioning correctly.