FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/what does it mean if my Ram 1500 DT (2019-Present) has a P0174 code?

what does it mean if my Ram 1500 DT (2019-Present) has a P0174 code?

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P01742-4 hours
3 min read
552 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0174 lean condition in Ram 1500 DT (2019-present). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on any electrical components.
  • ⚠Allow the engine to cool before inspecting or working on the intake system.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or stalling
  • •Decreased engine performance or power
  • •Poor fuel economy
  • •Increased emissions or failed emissions test

Diagnostic Steps

  1. 1Scan the vehicle using an OBD-II scanner to confirm the P0174 code and check for any additional codes.
  2. 2Inspect the intake system for vacuum leaks, including hoses, gaskets, and the intake manifold.
  3. 3Check fuel pressure to ensure it meets manufacturer specifications.
  4. 4Inspect the mass airflow sensor (MAF) for dirt or damage and perform a MAF sensor test.
  5. 5Examine the fuel injectors for clogs or malfunction.
  6. 6Inspect the exhaust system for leaks which could affect sensor readings.

Solution

Solution

1. Preparation

  • Gather tools and parts needed for repair.
  • Disconnect the negative battery cable to ensure safety.

2. Inspect and Repair Vacuum Leaks

  • Sub-steps:
    1. Visually inspect all vacuum hoses and connections for cracks or disconnections.
    2. Use a smoke machine to detect leaks in the intake manifold and hoses.
  • Tools Required: Smoke machine, flashlight

3. Check and Clean the MAF Sensor

  • Sub-steps:
    1. Locate the MAF sensor in the air intake duct.
    2. Disconnect the electrical connector and remove the sensor.
    3. Clean the sensor with MAF cleaner, taking care not to touch the sensor wire.
    4. Reattach the sensor and its connector.
  • Tools Required: MAF cleaner, Torx or socket set

4. Test Fuel Pressure

  • Sub-steps:
    1. Connect a fuel pressure gauge to the fuel rail service port.
    2. Turn the ignition to the "ON" position without starting the engine and check the pressure reading.
    3. Compare the reading to the manufacturer's specified fuel pressure; replace the fuel pump if below spec.
  • Tools Required: Fuel pressure gauge

5. Inspect and Test Fuel Injectors

  • Sub-steps:
    1. Disconnect the fuel injector connectors.
    2. Use a multimeter to check the resistance of each fuel injector to ensure they are within specifications.
    3. Listen for injector operation using a mechanic's stethoscope while the engine is running.
  • Tools Required: Multimeter, mechanic's stethoscope

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Smoke machine
  • •Fuel pressure gauge
  • •MAF cleaner
  • •Multimeter
  • •Mechanic's stethoscope

Parts Required

  • •Vacuum hoses (if damaged)
  • •MAF sensor (if faulty)
  • •Fuel pump (if pressure is low)
  • •Fuel injectors (if clogged)

Additional Information

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) smell like burning oil

    Learn how to diagnose and fix the burning oil smell in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Engine5 symptoms

  2. how to troubleshoot my Ram 1500 DT (2019-Present) fuel pump issues

    Learn how to troubleshoot and fix fuel pump issues in your 2019 Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

    Fuel System6 symptoms

  3. how to resolve low oil pressure in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix low oil pressure in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  4. how to clear the check engine light on my Ram 1500 DT (2019-Present)

    Learn how to clear the check engine light on your Ram 1500 DT (2019-present) with this step-by-step guide. Diagnose and reset the CEL effectively.

    Engine5 symptoms

  5. what could cause my Ram 1500 DT (2019-Present) turbo to not spool

    Learn how to diagnose and fix turbo spooling issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  6. why does my Ram 1500 DT (2019-Present) make a hissing noise

    Learn to diagnose and fix the hissing noise in your 2019-Present Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation