what are common issues with Ram 1500 DT (2019-Present) at 80k miles

Ram 1500 DT (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

520 words

Problem Statement

Discover common transmission issues with Ram 1500 DT (2019-Present) at 80k miles. Step-by-step diagnostic and repair guide for effective solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before opening the radiator or working on the cooling system.
•Use proper lifting techniques and safety equipment when working under the vehicle.

Symptoms

•Transmission slipping or harsh shifting
•Electrical gremlins such as flickering lights or non-functional accessories
•Unusual noise from the suspension, especially over bumps
•Engine stalling or rough idle
•Warning lights illuminated on the dashboard
•Decreased fuel efficiency

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner for any stored error codes.
2
Perform a visual inspection of the transmission fluid level and condition.
3
Check the battery and alternator output with a multimeter.
4
Inspect suspension components visually for wear or damage.
5
Review the electrical system, checking fuses and relays related to reported issues.
6
Test drive the vehicle to replicate any reported symptoms and note performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Floor jack
•Jack stands
•Torque wrench

Parts Required

•Transmission fluid
•Transmission filter
•Gasket for transmission pan
•Battery (if needed)
•Alternator (if needed)
•Fuses/Relays (as required)
•Suspension components (shocks, struts, bushings as needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner for any stored error codes.
2
Perform a visual inspection of the transmission fluid level and condition.
3
Check the battery and alternator output with a multimeter.
4
Inspect suspension components visually for wear or damage.
5
Review the electrical system, checking fuses and relays related to reported issues.
6
Test drive the vehicle to replicate any reported symptoms and note performance.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, socket set, floor jack, jack stands, torque wrench.
Disconnect the battery before beginning any electrical work.

2. Address Transmission Issues

Step 1: Check Transmission Fluid
- Remove the dipstick and check fluid level and condition. If low or dirty, replace with the manufacturer-recommended fluid.
Step 2: Inspect and Replace Transmission Filter
- Drain transmission fluid, remove the transmission pan, and replace the filter. Reinstall the pan with new gasket and torque to manufacturer specifications.

3. Repair Electrical Issues

Step 1: Test Battery and Alternator
- Use a multimeter to test battery voltage (should be around 12.6V) and alternator output (should be around 13.8-14.4V while running). Replace the battery or alternator if out of range.
Step 2: Replace Faulty Fuses or Relays
- Identify and replace any blown fuses or malfunctioning relays in the fuse box.

4. Inspect and Repair Suspension

Step 1: Raise the Vehicle
- Use a floor jack and jack stands to safely lift the vehicle.
Step 2: Inspect Suspension Components
- Examine shocks, struts, and bushings for wear or damage. Replace any worn parts as necessary.