my Ram 1500 DT (2019-Present) is shaking when I brake, what should I check?

Ram 1500 DT (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

469 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on brake systems to prevent accidental deployment of electronic systems.
•Allow brakes to cool before handling components to avoid burns.

Symptoms

•Steering wheel vibrations during braking
•Vehicle pulling to one side when braking
•Uneven brake pad wear
•Brake pedal pulsation
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads and rotors for excessive wear or damage.
2
Check brake calipers for proper operation and ensure they are not sticking.
3
Examine wheel alignment and tire balance.
4
Inspect suspension components for wear, including control arms and tie rods.
5
Scan for any error codes that might indicate issues with the ABS system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench

Parts Required

•Brake pads
•Brake rotors
•Brake fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads and rotors for excessive wear or damage.
2
Check brake calipers for proper operation and ensure they are not sticking.
3
Examine wheel alignment and tire balance.
4
Inspect suspension components for wear, including control arms and tie rods.
5
Scan for any error codes that might indicate issues with the ABS system.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and set the parking brake.
Ensure all safety equipment is available (gloves, goggles).

2. Lift the Vehicle

Use a hydraulic jack to lift the front wheels off the ground.
Secure with jack stands to ensure safety.

3. Inspect and Replace Brake Components

Check Brake Pads and Rotors
- Remove the wheel using a socket set.
- Inspect the brake pads for thickness; replace if below 1/8 inch.
- Check brake rotors for warping or scoring; replace if necessary.
Replace Components
- If replacement is needed, remove the caliper bolts and slide the caliper off.
- Replace the pads and rotor; torque caliper bolts to manufacturer specifications (usually around 25-35 ft-lbs).

4. Inspect Wheel and Suspension Components

Check Wheel Alignment and Balance
- Examine tires for uneven wear.
- If necessary, take the vehicle to a shop for alignment and balancing.
Inspect Suspension
- Check for wear in the control arms, tie rods, and bushings.
- Replace any worn components.

5. Reassemble and Lower the Vehicle

Reattach the wheel and torque the lug nuts to the specified value (typically around 100-110 ft-lbs).
Lower the vehicle off the jack stands.