FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/my Ram 1500 DT (2019-Present) has a P0302 code how do I fix this?

my Ram 1500 DT (2019-Present) has a P0302 code how do I fix this?

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03022-4 hours
3 min read
529 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems to prevent shock.
  • ⚠Allow the engine to cool before removing any components to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine shaking
  • •Decreased engine power or acceleration
  • •Increased fuel consumption
  • •Possible engine stalling

Diagnostic Steps

  1. 1Scan the vehicle's OBD-II system using a scanner to confirm the P0302 code and check for any additional codes.
  2. 2Inspect the spark plug and ignition coil for cylinder 2 for signs of wear or damage.
  3. 3Perform a visual inspection of the ignition wiring and connectors for damage or corrosion.
  4. 4Check the fuel injector operation for cylinder 2 to ensure it is functioning correctly.
  5. 5Conduct a compression test on cylinder 2 to rule out mechanical issues.
  6. 6Inspect the air intake and vacuum hoses for leaks that could affect engine performance.

Solution

Solution

1. Preparation

  • Gather all necessary tools and materials.
  • Ensure the vehicle is parked on a level surface and the engine is off and cool.
  • Disconnect the negative battery terminal to prevent electrical shock.

2. Inspect and Replace Spark Plug

  • Sub-steps:
    1. Remove the engine cover if applicable.
    2. Disconnect the ignition coil connector for cylinder 2.
    3. Remove the ignition coil using a socket set.
    4. Remove the spark plug using a spark plug socket and inspect it for wear or fouling.
    5. Replace the spark plug with a new one, ensuring it is gapped correctly (typically 0.040 inches for most Ram 1500 models).

3. Inspect and Replace Ignition Coil

  • Sub-steps:
    1. If the ignition coil is damaged or faulty, replace it with a new unit.
    2. Install the new ignition coil in place and reconnect the connector.
    3. Reinstall the engine cover if applicable.

4. Fuel Injector Testing

  • Sub-steps:
    1. Disconnect the fuel injector connector for cylinder 2.
    2. Use a multimeter to check the injector's resistance (typically should be around 12-16 Ohms).
    3. If the injector is faulty, replace it with a new one.
    4. Reconnect the injector connector.

5. Reassemble and Reconnect Battery

  • Sub-steps:
    1. Reconnect the negative battery terminal.
    2. Start the engine and let it idle for a few minutes to ensure everything is functioning properly.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Spark plug socket
  • Torque wrench
  • Multimeter

Parts Required

  • Spark plug for cylinder 2
  • Ignition coil for cylinder 2 (if necessary)
  • Fuel injector for cylinder 2 (if necessary)

Additional Information

Error CodeP0302
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

3 items

Related Faults

  1. how to fix the P0011 code in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0011 VVT system issue in Ram 1500 DT (2019-present). Step-by-step guide with diagnostic procedures and repair instructions.

    P0011Engine5 symptoms

  2. how to fix Ram 1500 DT (2019-Present) check engine light P0420 code

    Learn how to diagnose and fix P0420 catalytic converter efficiency issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms

  3. why does my Ram 1500 DT (2019-Present) check engine light come on and off

    Learn how to diagnose and fix the intermittent check engine light issue on your Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  4. how to fix a rough start in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix a rough start in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  5. my Ram 1500 DT (2019-Present) is using too much gas, what’s wrong

    Learn how to diagnose and fix excessive fuel consumption in the 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System6 symptoms

  6. what to do if the traction control light is on in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix the traction control light issue in a 2019-Present Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation