FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/my Ram 1500 DT (2019-Present) has a check engine light with code P0700, what does it mean?

my Ram 1500 DT (2019-Present) has a check engine light with code P0700, what does it mean?

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07002-4 hours
3 min read
515 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Component
Transmission
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before checking transmission fluid levels.

Symptoms

  • •Check engine light illuminated
  • •Rough shifting or delayed engagement
  • •Transmission slipping or erratic behavior
  • •Unusual engine RPM fluctuations
  • •Reduced fuel efficiency

Diagnostic Steps

  1. 1Scan for additional error codes using an OBD-II scanner to identify specific transmission issues.
  2. 2Inspect transmission fluid level and condition; low or dirty fluid can cause transmission problems.
  3. 3Check the wiring and connectors to the transmission control module (TCM) for damage or corrosion.
  4. 4Test the transmission control module (TCM) for proper voltage and ground.
  5. 5Evaluate the transmission range sensor for correct operation.
  6. 6Perform a visual inspection of the transmission itself for leaks or physical damage.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is on a level surface and securely supported.
  • Disconnect the negative battery terminal to avoid electrical shorts.

2. Transmission Fluid Check

  • Tools Required: Dipstick or fluid level gauge.
  • Remove the transmission dipstick and wipe it clean.
  • Reinsert the dipstick and remove it again to check fluid level; add fluid if low.
  • Assess the fluid condition; if it appears dark or has a burnt smell, a fluid change may be necessary.

3. Inspect Wiring and Connectors

  • Tools Required: Multimeter, socket set.
  • Visually inspect the wiring harness connected to the TCM for any signs of wear, fraying, or corrosion.
  • Use a multimeter to check for continuity and proper voltage at the TCM connectors.
  • Repair or replace any damaged wiring or connectors as necessary.

4. Test Transmission Control Module (TCM)

  • Tools Required: OBD-II scanner.
  • Reconnect the battery terminal.
  • Using the OBD-II scanner, check for any additional codes related to the TCM.
  • If no issues appear, perform a TCM reset according to manufacturer specifications.

5. Check Transmission Range Sensor

  • Tools Required: Socket set, multimeter.
  • Locate the transmission range sensor on the transmission housing.
  • Disconnect the sensor and test for proper resistance values according to the service manual.
  • Replace the sensor if it fails the resistance test.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Socket set
  • Dipstick or fluid level gauge

Parts Required

  • Transmission fluid (if low)
  • Transmission range sensor (if faulty)

Additional Information

Error CodeP0700
Component

Transmission

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

4 items

Parts

2 items

Related Faults

  1. how to fix my Ram 1500 DT (2019-Present) if it won't start in cold weather

    Learn how to diagnose and fix no-start issues in cold weather for the 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical6 symptoms

  2. why is my Ram 1500 DT (2019-Present) experiencing transmission fluid leaks

    Learn how to diagnose and fix transmission fluid leaks in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms

  3. how to fix my Ram 1500 DT (2019-Present) if it is stalling at stop lights

    Learn how to diagnose and fix stalling issues in the 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  4. why is my Ram 1500 DT (2019-Present) making a popping noise from the exhaust

    Learn how to diagnose and fix popping noise from exhaust in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Exhaust System5 symptoms

  5. my Ram 1500 DT (2019-Present) is pulling to one side, what could be wrong

    Learn how to diagnose and fix pulling issues in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  6. why does my Ram 1500 DT (2019-Present) have a delay in shifting

    Learn how to diagnose and fix transmission delay issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation