FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ram 1500 DT (2019-Present) has a check engine light and runs rough - Ram 1500
Home/Cars/Ram/1500/DT (2019-Present)/my Ram 1500 DT (2019-Present) has a check engine light and runs rough

my Ram 1500 DT (2019-Present) has a check engine light and runs rough

Ram 1500 DT (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
577 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the rough running condition and check engine light on your 2019 Ram 1500 DT. Step-by-step guide included.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Engine runs rough (misfiring)
  • •Loss of power during acceleration
  • •Poor fuel economy
  • •Engine stalling at idle
  • •Increased engine vibrations

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •MAF sensor cleaner

Parts Required

  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Fuel filter (if necessary)
  • •MAF sensor (if replacement is needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
  • Allow the engine to cool before proceeding with any repairs.
2. Address Error Codes
  • Use the OBD-II scanner to review and document the error codes.
  • Clear the codes and see if they reappear after a test drive.
3. Inspect and Replace Spark Plugs
  • Remove the engine cover (if applicable).
  • Use a socket set to carefully remove the spark plugs.
  • Inspect the spark plugs for wear or fouling. Replace with OEM or equivalent spark plugs if necessary.
  • Torque the new spark plugs to the manufacturer’s specification (typically around 13-15 lb-ft).
4. Check and Replace Ignition Coils
  • Disconnect the electrical connectors from the ignition coils.
  • Remove the ignition coils using the socket set.
  • Inspect the coils for cracks or damage. Replace any faulty coils.
  • Reinstall the new coils and reconnect the electrical connectors.
5. Inspect Fuel System
  • Connect the fuel pressure gauge to the fuel rail.
  • Turn the ignition to the "ON" position (do not start the engine) and check the fuel pressure. It should match the manufacturer’s specifications.
  • If pressure is low, inspect the fuel filter and fuel pump, and replace if necessary.
6. Clean or Replace MAF Sensor
  • Locate the MAF sensor in the air intake system.
  • Disconnect the electrical connector carefully.
  • Remove the MAF sensor and clean it using MAF sensor cleaner. If cleaning does not resolve issues, replace the sensor.
7. Test Drive
  • Reconnect the battery and start the engine.
  • Allow the engine to reach operating temperature and monitor for rough running or any error codes.