FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to troubleshoot Ram 1500 DT (2019-Present) misfire with code P0302

how to troubleshoot Ram 1500 DT (2019-Present) misfire with code P0302

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03022-4 hours
3 min read
573 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow engine to cool before opening any engine components.

Symptoms

  • •Engine runs rough at idle
  • •Check engine light illuminated
  • •Decreased fuel efficiency
  • •Engine vibration noticeable during acceleration
  • •Increased exhaust emissions

Diagnostic Steps

  1. 1Scan the vehicle's OBD-II system to confirm the P0302 code and check for any additional codes.
  2. 2Inspect the spark plug in cylinder 2 for wear, carbon deposits, or damage.
  3. 3Check the ignition coil for cylinder 2 using a multimeter to ensure it operates within specifications.
  4. 4Perform a compression test on cylinder 2 to determine if there are any mechanical issues (valve seating, piston rings).
  5. 5Inspect fuel injector operation for cylinder 2 by performing a balance test or checking for proper electrical signal.
  6. 6Examine wiring and connectors to the ignition coil and fuel injector for damage or corrosion.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Disconnect the negative battery cable to prevent electrical shorts.
  • Allow the engine to cool before working on it.

2. Replace Spark Plug

  • Tools Required: Spark plug socket, torque wrench, ratchet, dielectric grease.
  • Remove the ignition coil from cylinder 2.
    • Unscrew the bolts securing the ignition coil.
    • Carefully pull the coil out, ensuring no damage to the connector.
  • Remove the spark plug from cylinder 2.
    • Use a spark plug socket to unscrew the spark plug.
  • Install the new spark plug.
    • Apply dielectric grease to the threads of the new spark plug.
    • Torque the spark plug to the manufacturer's specification (typically around 13-15 lb-ft).
  • Reinstall the ignition coil.

3. Replace Ignition Coil (if needed)

  • Tools Required: Ratchet, socket set.
  • If the ignition coil is faulty, remove it as described above.
  • Install the new ignition coil.
    • Ensure it fully seats on the spark plug and tighten the mounting bolts to specification.
  • Reconnect the electrical connector to the ignition coil.

4. Inspect and Replace Fuel Injector (if needed)

  • Tools Required: Fuel injector removal tool, socket set, fuel line disconnect tool.
  • Disconnect the fuel injector connector.
  • Remove the fuel rail if necessary to access the injector.
  • Replace the faulty fuel injector with a new one.
  • Reinstall the fuel rail and reconnect the fuel lines.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Spark plug socket
  • Torque wrench
  • Ratchet
  • Multimeter
  • Fuel injector removal tool
  • Fuel line disconnect tool
  • Socket set

Parts Required

  • Spark plug for cylinder 2
  • Ignition coil for cylinder 2 (if faulty)
  • Fuel injector for cylinder 2 (if faulty)

Additional Information

Error CodeP0302
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

8 items

Parts

3 items

Related Faults

  1. why is my Ram 1500 DT (2019-Present) experiencing transmission fluid leaks

    Learn how to diagnose and fix transmission fluid leaks in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms

  2. why does my Ram 1500 DT (2019-Present) have a fuel smell in the cabin

    Learn how to diagnose and fix fuel smell in the cabin of your Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System5 symptoms

  3. how to troubleshoot my Ram 1500 DT (2019-Present) that won’t start after sitting

    Learn how to troubleshoot and fix a no-start condition in the 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical6 symptoms

  4. why does my Ram 1500 DT (2019-Present) lose coolant without any visible leaks?

    Discover how to diagnose and fix coolant loss issues in the 2019-Present Ram 1500 DT. Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Cooling System5 symptoms

  5. why does my Ram 1500 DT (2019-Present) battery die overnight?

    Learn how to diagnose and fix battery drain issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms

  6. how to fix the P0011 code in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0011 VVT system issue in Ram 1500 DT (2019-present). Step-by-step guide with diagnostic procedures and repair instructions.

    P0011Engine5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation