FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to troubleshoot my Ram 1500 DT (2019-Present) fuel pump issues

how to troubleshoot my Ram 1500 DT (2019-Present) fuel pump issues

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: medium2-4 hours
3 min read
585 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix fuel pump issues in your 2019 Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

Component
Fuel System
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on the electrical system.
  • ⚠Relieve fuel system pressure before removing the fuel pump.

Symptoms

  • •Check engine light illuminated
  • •Engine cranks but fails to start
  • •Engine stalling during operation
  • •Poor acceleration or loss of power
  • •Unusual noises from the fuel tank area
  • •Decreased fuel efficiency

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to check for related fault codes.
  2. 2Inspect the fuel pump relay and fuse for any signs of damage or failure.
  3. 3Check fuel pressure using a fuel pressure gauge to ensure it meets the manufacturer's specifications.
  4. 4Listen for the fuel pump operation (a humming sound) when the ignition is turned on (before starting the engine).
  5. 5Inspect the wiring and connectors to the fuel pump for any signs of wear or corrosion.
  6. 6Check the fuel filter for clogs or restrictions that may affect fuel flow.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shock.
  • Relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.

2. Remove Fuel Pump

  • Tools Required: Socket set, fuel line disconnect tool, safety goggles, gloves, torque wrench.
  • Sub-steps:
    1. Remove the rear seat or access panel to access the fuel pump module.
    2. Disconnect the electrical connector from the fuel pump module.
    3. Use the fuel line disconnect tool to detach the fuel lines from the pump.
    4. Unscrew the retaining ring and carefully lift the fuel pump assembly from the fuel tank.

3. Inspect and Replace

  • Tools Required: Multimeter, cleaning cloths.
  • Sub-steps:
    1. Inspect the fuel pump for any physical damage or wear.
    2. Use a multimeter to check the pump's electrical resistance; compare with specifications.
    3. If the pump is faulty, replace it with a new unit.
    4. Clean the fuel tank opening and ensure the new pump is seated properly.

4. Reinstallation

  • Tools Required: Torque wrench.
  • Sub-steps:
    1. Reinstall the fuel pump assembly into the tank, securing it with the retaining ring.
    2. Reconnect the fuel lines and electrical connector.
    3. Replace the fuel pump fuse and reconnect the negative battery terminal.
    4. Start the engine and let it run to check for leaks.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Fuel pressure gauge
  • Socket set
  • Fuel line disconnect tool
  • Multimeter
  • Torque wrench

Parts Required

  • Fuel pump assembly (if defective)
  • Fuel filter (if clogged)

Additional Information

Component

Fuel System

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

6 items

Parts

2 items

Related Faults

  1. my Ram 1500 is pulling to one side while driving what's wrong

    Learn how to diagnose and fix your Ram 1500 pulling to one side while driving. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  2. how to tell if my Ram 1500 DT (2019-Present) struts are worn out?

    Learn how to diagnose and replace worn struts on a 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension6 symptoms

  3. what causes my Ram 1500 DT (2019-Present) to stall while driving

    Learn how to diagnose and fix engine stalling issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  4. why is my Ram 1500 DT (2019-Present) making a popping noise from the exhaust

    Learn how to diagnose and fix popping noise from exhaust in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Exhaust System5 symptoms

  5. why does my Ram 1500 DT (2019-Present) make a grinding noise when starting

    Learn how to diagnose and fix grinding noise during starting in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

  6. how to fix the P0171 code in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0171 engine too lean condition in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation