FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the transmission fluid light on Ram 1500 DT (2019-Present) - Ram 1500
Home/Cars/Ram/1500/DT (2019-Present)/how to reset the transmission fluid light on Ram 1500 DT (2019-Present)

how to reset the transmission fluid light on Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
30 minutes
Time
easy
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
348 words

Problem Statement

Learn how to reset the transmission fluid light on a 2019-present Ram 1500 DT. Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component
Transmission
Estimated Time
30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is on a flat surface and securely parked before working under the hood.

Symptoms

  • •Transmission fluid light is illuminated on the dashboard
  • •Potential warning messages related to transmission fluid levels
  • •Vehicle may exhibit delayed shifting
  • •Possible overheating of the transmission if fluid is low

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None.

Parts Required

  • •Transmission fluid (if levels are low)

Additional Information

Affected Component
Transmission
Estimated Time
30 minutes
Difficulty
easy
Severity
medium
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface.
  • Engage the parking brake for safety.
2. Check Fluid Level
  • Sub-steps:
    • Open the hood and locate the transmission dipstick.
    • Remove the dipstick, clean it with a lint-free cloth, and reinsert it fully.
    • Remove the dipstick again to check the fluid level.
    • If fluid is low, add the appropriate transmission fluid type as specified in the owner’s manual.
  • Tools Required: None.
3. Reset the Transmission Fluid Light
  • Sub-steps:
    • Turn the ignition key to the “ON” position without starting the engine.
    • Press the gas pedal three times within ten seconds.
    • Turn the ignition off, then start the engine.
    • The transmission fluid light should now be reset.
  • Tools Required: None.